Balcony & Canopy Projects
The Bury St Edmunds Project
Elegant half-round balconies enhance this modern development, reflecting the window design. They are supported by 2 RSJs built into the structure of the building.
The Witchford Project
Extensive first floor balcony with a bay created to make a feature of the balustrades and double top rail.
The Brighton Marina Project
These elegant Curved Balconies were manufactured for this Brighton Marina development by Demax Designs using the Demax Ref: DC79 Cast Bowed Baluster and Cast Curved Handrail both produced by Demax Foundry.
The Aubrey Walk Project
Our architectural foundry has the complete range of these Adams heart castings. This particular balcony was in such a poor state that we cast entirely new ones in LM8 aluminium.
The Boyne Terrace Project
A typical balcony to a modern town house. When we construct the roofs for our canopies, we roll steel ribs to form the underside of the roof profile on to which we overlay with zinc coated sheet, and then add the dummy top ribs.
The Paris Project
This balcony and lead canopy is finished with openwork posts and lightweight balustrade panels.
The Sheridon Project
This balcony and lead canopy is finished with openwork posts and lightweight balustrade panels.
The Hampton Court Project
Traditional lead canopy with open support columns retains the country style of this property
The Ousden Project
A lead canopy with support columns makes the most of this bay window addition in a modern style.
The Portico Project
Photographed when partially completed, this canopy creates a covered courtyard. The canopy was designed so that the gutters either side act as walkways, to allow cleaning and servicing of the glass roof. A cat ladder was included
The Crown Hotel Project
Simple open canopy installed as part of the Crown Hotel improvement scheme at Bildeston, Suffolk.